2" (5.08 cm) Galvanized Pole
Model# GP2002 |
3"
(7.62 cm) Galvanized Pole
Model# GP2003 |
|
|
The simple and quick way to anchor: cut
poles to length, insert through Pole Connector and drive
into the lake bed. Top with a Pole Cover for an
attractive finish. |
2" (5.08 cm) Pole Pounder
Model # PP1002
Drive poles into the lake bed with the Pole
Pounder. (Accepts up to a 3" outside diameter pole)
2" (5.08 cm) Pole Remover
Model # PR1002
Use this convenient lever to remove anchoring
poles. Heavy-duty stand and vise make quick work of dislodging
2" poles.
2" (5.08 cm) Pole Auger
Model #PA1002
Make it easy
to install/remove your pole anchors with the Pole Auger (one
per pole). Attach the auger to the bottom of the pole with
bolt, slip a Pole Connector over the top of the pole and
attach to dock. Drill a hole through the tope of the pole,
insert a dowel (not included) and turn to auger the pole into
the lake bed. Remove pole by turning the dowel in the opposite
direction. (Hardware
included)
2" (5.08 cm) Dead Man Collar
Model # DM2002
Anchor
your dock without poles. Slip the long end of the Dead Man
Collar in the Pole Connector on the side of the dock and rig a
weighted chain through the bottom of the collar. Fasten the
chain by setting a link in the groove in the top of the
collar. (Chain and weight not included)
Stiff Arm Bracket
Model # SAB1020
Easily bolt this bracket to the deck of your
dock for use with a Stiff Arm Fittings.
Stiff Arm Fittings
Model # SAF1020
Anchor your dock without poles are weights with
these fittings. The Stiff Arm Bracket is attached to the dock
and is fitted to a connecting pole. The other end of the
connecting pole attaches to a ground anchor on shore.
Piling Loops
Attach you
floating dock to a permanent structure with the Piling
Loop. Bolt the bracket to the deck of the dock, loop the
support around the piling (up to 18" in diameter) and
connect back to the bracket. Great for fluctuating water
levels. (Hardware included) |
|
Size |
Model # |
|
10" (25.4 cm) |
PL1010 |
|
12" (30.48 cm) |
PL1012 |
|
14" (35.56 cm) |
PL1014 |
|
16" (40.64 cm) |
PL1016 |
|
18" (45.72 cm) |
PL1018 |
|
Gangway Hinge
Model #GH2010
Flip your gangway up and over onto the dock
with the Gangway Hinge. Use it to prevent access to the dock,
to make lawn mowing easier or to make towing the dock easier.
(Hardware included)
2" x 12" (5.08 cm x 30.48 cm)
Wood Plank
Model # WP2X12
Our treated lumber gangways provide
lasting support for the transition from land to water. The
lumber is sturdy, safe and is available in various lengths.
Roller Kit (set)
Model # RK1020
Provide a safe and stable transition from
stationary to floating docks with the Roller Kit. The
easy-rolling wheel ensures that the gangway moves smoothly
along the dock's surface when water levels fluctuate.
Make a
connection to Life™ |
